Due to the ATF pistol brace ruling, Jacob Grey will only ship pistols with a round tube. No braces will be sold.Learn More
$279.99
JG 7.62×39 High Polished DLC BCG – Black
Why DLC on your BCG:
First off, the surface is very hard and smooth making it an extremely high wear resistance coating. The friction coefficient is greatly reduced requiring less lubrication. Operating temperatures are lowered. Yes, you can run without lubrication when it’s necessary but its good practice to use a small amount of oil whenever allowable.
Description
Jacob Grey Firearms DLC (Diamond-Like Carbon) coatings have been widely successful in the aerospace industry. Jacob Grey’s carbon-based coating has extreme hardness due to the diamond crystal structure and is soft and lubricious due to the graphite crystal structure. Our DLC coatings are generally amorphous (without typical crystal structure). The properties of DLC coatings in terms of increased hardness, coefficient of friction, roughness, adhesion level, load carrying capacity, resistance to humidity influenced degradation, fatigue tolerance, etc. can easily be explained as beneficial within the firearms industry. But with its sleek and stylish looks and its ability to withstand carbon buildup and fouling, why would you want anything less inside your firearm. Available in Jacob Grey’s signature DLC black color Lethal Black.
SPECIFICATIONS:
- Bolt: 9310 Steel, MPI, shot peened, and DLC coated
- Bolt Carrier: 8620 Steel, shot peened, and DLC coated.
- Bolt Carrier Style: M16 Full Auto
- Bolt Face Depth: .125 (measured face to end)
- Gas Key: 4130 Steel, attached with Grade 8 hardware, properly staked, sealed, and DLC Coated
- Cam Pin: 4140 Steel, Manganese Phosphate coated.
- Enhanced Firing Pin: 8740 Steel, center‐less ground and Hard Chrome coated.
- Extractor: JG Enhanced Shock Resistant Extractor
- Mil-Spec Extractor and Ejector Springs, Firing Pin Retaining Pin, Gas Rings
- Mil-Spec Heat Treated
- Length: 7.5″
- Weight: 11.7 oz.
- Lifetime warranty
No attribute set
No attribute set
Standard Equipment
No standard equipment set
Related Accessories
Similar Firearms
SIMILAR FIREARMS
JG ULTRALIGHT
JG ULTRALIGHT
The Jacob Grey Ultralight Rifle was designed with the next generation AR15 in mind. This AR15 rifle is built around the 7075-T6 billet lower receiver specifically machined and cut in areas where excess material was unnecessary and areas that see excess use and wear, reinforced and strengthened to give a sleek, refined look, without losing the classic lines of the AR15 platform. The same consideration was given to the matching billet upper receiver.
JG10
JG10
Full selection of Complete AR10 Rifles, Pistols, Receivers, & Builder Kits available. All individually crafted from billet aluminum to Mil-Spec standards.
JG15
JG15
Full selection of Complete AR15 Rifles, Pistols, Receivers, & Builder Kits available. All individually crafted from billet aluminum to meet Mil-Spec standards. Built to last a lifetime.
JG9
JG9
Full selection of Complete AR9 Rifles, Pistols, Receivers, & Builder Kits available. All individually crafted from billet aluminum to Mil-Spec standards.