Due to the ATF pistol brace ruling, Jacob Grey will only ship pistols with a round tube. No braces will be sold.Learn More
Rifles
The Jacob Grey Ultralight Rifle was designed with the next generation AR15 in mind. This AR15 rifle is built around the 7075-T6 billet lower receiver specifically machined and cut in areas where excess material was unnecessary and areas that see excess use and wear, reinforced and strengthened to give a sleek, refined look, without losing the classic lines of the AR15 platform. The same consideration was given to the matching billet upper receiver.
JG ULTRALIGHT
JG ULTRALIGHT
The Jacob Grey Ultralight Rifle was designed with the next generation AR15 in mind. This AR15 rifle is built around the 7075-T6 billet lower receiver specifically machined and cut in areas where excess material was unnecessary and areas that see excess use and wear, reinforced and strengthened to give a sleek, refined look, without losing the classic lines of the AR15 platform. The same consideration was given to the matching billet upper receiver.
JG10
JG10
Full selection of Complete AR10 Rifles, Pistols, Receivers, & Builder Kits available. All individually crafted from billet aluminum to Mil-Spec standards.
JG15
JG15
Full selection of Complete AR15 Rifles, Pistols, Receivers, & Builder Kits available. All individually crafted from billet aluminum to meet Mil-Spec standards. Built to last a lifetime.
JG9
JG9
Full selection of Complete AR9 Rifles, Pistols, Receivers, & Builder Kits available. All individually crafted from billet aluminum to Mil-Spec standards.
ALL
$1,399.99
| Magwell | Flared Magwell For Faster Reloads |
|---|---|
| Trigger Guard | Integrated, Oversized Winter Trigger Guard |
| Lower Receiver | 7075-T6 Billet Aluminum |
| Finish | Matte Black Hard-Coat Class III Anodized Finish |
| Upper Receiver | 7075-T6 Billet Aluminum |
| Bolt Catch | Threaded Bolt Catch Screw |
| Bolt Assembly | 9mm Bolt Assembly For Use With A Standard AR-15 Hammer |
| Barrel Length | 4.5 |
| Caliber | 9mm |
| Barrel Twist | 1/10 |
| Barrel Material | 9mm 1/2X36 Compensator For Reduced Felt Recoil |
| Stock | SB Tactical SBA3 Pistol Stabilizing Brace |
| Pistol Grip | Magpul K2 Grip |
| Buffer Type | Buffer System, Silent Mitigation Buffer |
| Handguard | Jacob Grey 10” Free Float M-LOK Hand Guard With A Modern, Ergonomic, 7 Side Design That Allows For 45 Degree Offset Mounting Options |
| Rail System | Continuous Top Mil-Spec Picatinny Rail |
| Weight | 5lb 5oz |
| Length | 23” |
| Magazine | Includes One 30 Round Magazine |
Magwell | Trigger Guard | Lower Receiver | Finish | Upper Receiver | Bolt Catch | Bolt Assembly | Barrel Length | Caliber | Barrel Twist | Barrel Material | Stock | Pistol Grip | Buffer Type | Handguard | Rail System | Weight | Length | Magazine |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Flared Magwell For Faster Reloads | Integrated, Oversized Winter Trigger Guard | 7075-T6 Billet Aluminum | Matte Black Hard-Coat Class III Anodized Finish | 7075-T6 Billet Aluminum | Threaded Bolt Catch Screw | 9mm Bolt Assembly For Use With A Standard AR-15 Hammer | 4.5 | 9mm | 1/10 | 9mm 1/2X36 Compensator For Reduced Felt Recoil | SB Tactical SBA3 Pistol Stabilizing Brace | Magpul K2 Grip | Buffer System, Silent Mitigation Buffer | Jacob Grey 10” Free Float M-LOK Hand Guard With A Modern, Ergonomic, 7 Side Design That Allows For 45 Degree Offset Mounting Options | Continuous Top Mil-Spec Picatinny Rail | 5lb 5oz | 23” | Includes One 30 Round Magazine |
$1,399.99
| Upper Receiver | Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist |
|---|---|
| Barrel Length | 7.5 |
| Barrel Twist | 1:10 |
| Barrel Material | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension |
| Handguard | JG 7-Sided M-Lok 1.3” Interior Diameter 7” Tactical Series Handguard |
| Gas Block | .750 Low Profile Gas Block |
| Gas Port Location | Carbine Length Gas Tube |
| Bolt Carrier Group | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier, Jacob Grey Enhanced Titanium Extractor |
| Muzzle Device | Jg 6-Way Nitrided Compensator |
| Finish | Black Anodize Type III Class 2 Hardcoat |
| Lower Receiver | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver |
| Buffer Type | Armaspec Sound Mitigation Buffer |
| Stock | SB Tactical SBA3 Pistol Brace |
| Pistol Grip | Magpul Moe Sl |
| Magazine | D&H Industries 30 Round Steel Mag, Flared And Beveled Magazine |
| Bolt Catch | 1/2X32 Threaded Bolt Catch Pin |
| Weight | 5lb 11oz |
Upper Receiver | Barrel Length | Barrel Twist | Barrel Material | Handguard | Gas Block | Gas Port Location | Bolt Carrier Group | Muzzle Device | Finish | Lower Receiver | Buffer Type | Stock | Pistol Grip | Magazine | Bolt Catch | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist | 7.5 | 1:10 | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension | JG 7-Sided M-Lok 1.3” Interior Diameter 7” Tactical Series Handguard | .750 Low Profile Gas Block | Carbine Length Gas Tube | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier, Jacob Grey Enhanced Titanium Extractor | Jg 6-Way Nitrided Compensator | Black Anodize Type III Class 2 Hardcoat | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver | Armaspec Sound Mitigation Buffer | SB Tactical SBA3 Pistol Brace | Magpul Moe Sl | D&H Industries 30 Round Steel Mag | 1/2X32 Threaded Bolt Catch Pin | 5lb 11oz |
$1,399.99
| Upper Receiver | Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist |
|---|---|
| Barrel Length | 8 |
| Barrel Twist | 1:7 |
| Barrel Material | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension |
| Handguard | JG 7-Sided M-Lok 1.3” Interior Diameter 7” Tactical Series Handguard |
| Gas Block | .750 Low Profile Gas Block |
| Gas Port Location | Pistol Length Gas Tube |
| Bolt Carrier Group | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier & Gas Key Fastened With Hardened Grade 8 Fasteners. |
| Muzzle Device | Jg 6-Way Nitrided Compensator |
| Finish | Black Anodize Type III Class 2 Hardcoat |
| Lower Receiver | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver |
| Buffer Type | Armaspec Sound Mitigation Buffer |
| Stock | SB Tactical SBA3 Pistol Brace |
| Pistol Grip | Magpul Moe Sl |
| Magazine | Flared And Beveled Magazine, Magpul 30 Round PMAG® |
| Bolt Catch | 1/2X32 Threaded Bolt Catch Pin |
| Weight | 5lb 9oz |
Upper Receiver | Barrel Length | Barrel Twist | Barrel Material | Handguard | Gas Block | Gas Port Location | Bolt Carrier Group | Muzzle Device | Finish | Lower Receiver | Buffer Type | Stock | Pistol Grip | Magazine | Bolt Catch | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist | 8 | 1:7 | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension | JG 7-Sided M-Lok 1.3” Interior Diameter 7” Tactical Series Handguard | .750 Low Profile Gas Block | Pistol Length Gas Tube | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier & Gas Key Fastened With Hardened Grade 8 Fasteners. | Jg 6-Way Nitrided Compensator | Black Anodize Type III Class 2 Hardcoat | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver | Armaspec Sound Mitigation Buffer | SB Tactical SBA3 Pistol Brace | Magpul Moe Sl | Flared And Beveled Magazine | 1/2X32 Threaded Bolt Catch Pin | 5lb 9oz |
$1,399.99
| Upper Receiver | Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist |
|---|---|
| Barrel Length | 16 |
| Barrel Twist | 1:7 |
| Barrel Material | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension |
| Handguard | JG 7 sided M-lok 1.3” interior diameter 15” Tactical Series Handguard |
| Gas Block | .750 Low Profile Gas Block |
| Gas Port Location | Pistol Length Gas Tube |
| Bolt Carrier Group | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier & Gas Key Fastened With Hardened Grade 8 Fasteners. |
| Muzzle Device | Jg 6-Way Nitrided Compensator |
| Finish | Black Anodize Type III Class 2 Hardcoat |
| Lower Receiver | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver |
| Buffer Type | Armaspec Sound Mitigation Buffer |
| Stock | Magpul Moe Stock |
| Pistol Grip | Magpul Moe Sl |
| Magazine | Magpul 30 Round PMAG® |
| Bolt Catch | 1/2X32 Threaded Bolt Catch Pin |
| Weight | 6lb 11oz |
Upper Receiver | Barrel Length | Barrel Twist | Barrel Material | Handguard | Gas Block | Gas Port Location | Bolt Carrier Group | Muzzle Device | Finish | Lower Receiver | Buffer Type | Stock | Pistol Grip | Magazine | Bolt Catch | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist | 16 | 1:7 | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension | JG 7 sided M-lok 1.3” interior diameter 15” Tactical Series Handguard | .750 Low Profile Gas Block | Pistol Length Gas Tube | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier & Gas Key Fastened With Hardened Grade 8 Fasteners. | Jg 6-Way Nitrided Compensator | Black Anodize Type III Class 2 Hardcoat | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver | Armaspec Sound Mitigation Buffer | Magpul Moe Stock | Magpul Moe Sl | Magpul 30 Round PMAG® | 1/2X32 Threaded Bolt Catch Pin | 6lb 11oz |
$1,349.99
| Upper Receiver | Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist |
|---|---|
| Barrel Length | 7.5 |
| Caliber | 5.56 |
| Barrel Twist | 1:8 |
| Barrel Material | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension |
| Handguard | JG 7-Sided M-Lok 1.3” Interior Diameter 7” Tactical Series Handguard |
| Gas Block | .750 Low Profile Gas Block |
| Gas Port Location | Carbine Length Gas Tube |
| Bolt Carrier Group | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier & Gas Key Fastened With Hardened Grade 8 Fasteners. |
| Muzzle Device | Jg 6-Way Nitrided Compensator |
| Finish | Black Anodize Type III Class 2 Hardcoat |
| Lower Receiver | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver |
| Buffer Type | Armaspec Sound Mitigation Buffer |
| Stock | SB Tactical SBA3 Pistol Brace |
| Pistol Grip | Magpul Moe Sl |
| Magazine | Flared And Beveled Magazine, Magpul 30 Round PMAG® |
| Bolt Catch | 1/2X32 Threaded Bolt Catch Pin |
| Weight | 5lb 9oz |
Upper Receiver | Barrel Length | Caliber | Barrel Twist | Barrel Material | Handguard | Gas Block | Gas Port Location | Bolt Carrier Group | Muzzle Device | Finish | Lower Receiver | Buffer Type | Stock | Pistol Grip | Magazine | Bolt Catch | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist | 7.5 | 5.56 | 1:8 | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension | JG 7-Sided M-Lok 1.3” Interior Diameter 7” Tactical Series Handguard | .750 Low Profile Gas Block | Carbine Length Gas Tube | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier & Gas Key Fastened With Hardened Grade 8 Fasteners. | Jg 6-Way Nitrided Compensator | Black Anodize Type III Class 2 Hardcoat | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver | Armaspec Sound Mitigation Buffer | SB Tactical SBA3 Pistol Brace | Magpul Moe Sl | Flared And Beveled Magazine | 1/2X32 Threaded Bolt Catch Pin | 5lb 9oz |
$1,299.99
| Upper Receiver | Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist |
|---|---|
| Barrel Length | 16 |
| Caliber | 5.56 |
| Barrel Twist | 1:8 |
| Barrel Material | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension |
| Handguard | Jacob Grey M-Lok 15” Tactical W/Low Profile Picatinny Rail |
| Gas Block | .750 Low Profile Gas Block |
| Gas Port Location | Pistol Length Gas Tube |
| Bolt Carrier Group | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier & Gas Key Fastened With Hardened Grade 8 Fasteners. |
| Muzzle Device | Jg 6-Way Nitrided Compensator |
| Finish | Black Anodize Type III Class 2 Hardcoat |
| Lower Receiver | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver |
| Buffer Type | Armaspec Sound Mitigation Buffer |
| Stock | Magpul Moe |
| Pistol Grip | Magpul Moe Sl |
| Magazine | Flared And Beveled Magazine, Magpul 30 Round PMAG® |
| Bolt Catch | 1/2X32 Threaded Bolt Catch Pin |
| Weight | 6lb 10oz |
Upper Receiver | Barrel Length | Caliber | Barrel Twist | Barrel Material | Handguard | Gas Block | Gas Port Location | Bolt Carrier Group | Muzzle Device | Finish | Lower Receiver | Buffer Type | Stock | Pistol Grip | Magazine | Bolt Catch | Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Jacob Grey 7075 Billet Aluminum Upper Receiver With No Forward Assist | 16 | 5.56 | 1:8 | 4150 Chrome Moly Vanadium Steel With A Qpq Corrosion Resistant Finish And Qpq Coated M4 Feed Ramp Extension | Jacob Grey M-Lok 15” Tactical W/Low Profile Picatinny Rail | .750 Low Profile Gas Block | Pistol Length Gas Tube | Bolt Carrier Group 9310 Heat Treated Steel With A Corrosion Resistant Black Nitride Finish. Shot Peened Mpi Bolt, 8620 Gas Carrier & Gas Key Fastened With Hardened Grade 8 Fasteners. | Jg 6-Way Nitrided Compensator | Black Anodize Type III Class 2 Hardcoat | Jacob Grey 7075 Billet Aluminum JG-15 Lower Receiver | Armaspec Sound Mitigation Buffer | Magpul Moe | Magpul Moe Sl | Flared And Beveled Magazine | 1/2X32 Threaded Bolt Catch Pin | 6lb 10oz |
$2,299.99
| Upper Receiver | 7075-T6 Billet Aluminum |
|---|---|
| Barrel Length | 8.3 |
| Caliber | 9mm |
| Barrel Twist | 1/10 |
| Barrel Material | Chrome Moly Barrel |
| Finish | Black Nitride Finish |
| Stock | HBPDW |
| Charging Handle | Jacob Grey Ambidextrous |
| Pistol Grip | Magpul Moe+ |
| Trigger Type | Jacob Grey Single Stage 2.5 To 5lb Adjustable Drop In Trigger Curved |
| Trigger Guard | Integrated Machined “WINTER” Trigger Guard. |
| Muzzle Device | Knurled Black Nitride Muzzle Brake And Flash Hider. |
| Magazine | 30 Round 9mm Extended |
| Bolt Carrier Group | JG Nitride Finish 9MM Blowback Operated BCG |
| Buffer Type | Silent Capture 9MM Buffer Spring and Piston. |
| Handguard | Ultra Light 7" Jacob Grey M-LOK |
| Weight | 6LBS 8OZ |
| Length | 23.5” |
| Mag Release | JG Aluminum Laser Engraved “Grey Ghost” 9MM |
| LRBHO | Last Round Bolt Hold Open Feature Integrated With Design And Features |
| Light | Inforce WML Gen 2 |
| Sights | MBUS Front/Rear Spring-Loaded Flip Up Sights |
Upper Receiver | Barrel Length | Caliber | Barrel Twist | Barrel Material | Finish | Stock | Charging Handle | Pistol Grip | Trigger Type | Trigger Guard | Muzzle Device | Magazine | Bolt Carrier Group | Buffer Type | Handguard | Weight | Length | Mag Release | LRBHO | Light | Sights |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7075-T6 Billet Aluminum | 8.3 | 9mm | 1/10 | Chrome Moly Barrel | Black Nitride Finish | HBPDW | Jacob Grey Ambidextrous | Magpul Moe+ | Jacob Grey Single Stage 2.5 To 5lb Adjustable Drop In Trigger Curved | Integrated Machined “WINTER” Trigger Guard. | Knurled Black Nitride Muzzle Brake And Flash Hider. | 30 Round 9mm Extended | JG Nitride Finish 9MM Blowback Operated BCG | Silent Capture 9MM Buffer Spring and Piston. | Ultra Light 7" Jacob Grey M-LOK | 6LBS 8OZ | 23.5” | JG Aluminum Laser Engraved “Grey Ghost” 9MM | Last Round Bolt Hold Open Feature Integrated With Design And Features | Inforce WML Gen 2 | MBUS Front/Rear Spring-Loaded Flip Up Sights |